Skip to content
MINIATURES

RAY LAROSE|MINIATURES

⌕
Or browse: Schemes Recipes Gallery Paints Conversion Chart

New to this? Start here

Gold 4 steps The basecoat, wash, highlight sequence most metal is built on. Ultramarine Armour 4 steps The same idea with an edge highlight, which is what makes armour read as armour. Rust 3 steps Stippling and drybrushing, and hard to get wrong. Ork Flesh 9 steps The whole ladder: a basecoat, two layers, a highlight, then glazes to blend it together.

Every miniature I have painted, with the paints and the steps to paint it again.

Paint Schemes

How I painted each model: the exact paints, the order they went on, and the finish they gave.

Before you start, and what the technique words mean
Thin your paint
Almost everything here goes on thinner than it comes out of the pot. Neat paint dries thick and fills in the detail you paid for. Add water a drop at a time on a palette until it runs somewhere between milk and heavy cream, depending on the brand, then build the colour up in two or three coats rather than one.
Start on a primed model
Unless a step says otherwise, every recipe here begins on a model that has already been primed - paint will not sit properly on bare plastic. Black unless the scheme says otherwise, which is what most of these were painted over.
The same words mean two things
Wash, shade and layer are both things you do and names Citadel puts on pots. The badge on a step is the action. The Type column in the paint list is which range the pot came from. A step badged "layer" is often painted with a Base paint, and that is not a mistake.
basecoat
The first solid colour over primer. Two thin coats beat one thick one.
highlight
A lighter colour on the parts that would catch the light.
layer
A slightly lighter colour over part of the coat below, leaving its edges showing.
wash
Thin, watery paint that runs into the recesses and shades the whole area at once.
edge
A highlight along a sharp edge only, painted with the side of the brush.
shade
Darker paint placed deliberately in the shadows rather than left to flow.
glaze
Heavily thinned paint over dry paint, to tint it and soften the join between two colours.
stipple
Dabbed on with the tip of the brush for a broken, rough, mottled surface.
drybrush
Almost-dry paint dragged across raised texture so it catches only the high points.
blend
Two colours worked into each other while both are wet, so there is no visible line.
special
Anything that is not one of the above. The step note says what it is.

Reikland Reavers

🔗
HumansBlood BowlSeptember 2026
FinishMuted greens and greys, heavily chipped
PrimaryMuted greens dominate
ContrastBright white striping
TechniqueSoft layering, no washes
BASE
PrimeBlack
SKIN
RecipeBasic White Flesh
RecipeDark Skin
GREENS (Armour)
BaseDark Camo Green
EdgeDark Camo Green + Warm Grey mix 1:1
UNDER ARMOUR / SOCKS
BaseDark Yellow Green
TROUSERS
BaseWarm Grey
METALS
BaseLeadbelcher
WashNuln Oil
STRIPES
BaseBold Titanium White
BASE:
RecipeBlood Bowl Bases
RecipeBasic White Flesh
  1. 1
    basecoatElf Skin Tone (72.004)Vallejo
    Base all skin·Artis Opus Series S 3
  2. 2
    layerBarbarian Skin (72.071)Vallejo
    Deep shadows·Artis Opus Series S 3
  3. 3
    highlightSunny Skin Tone (70.845)Vallejo
    Blend in highlights·Artis Opus Series S 3
  4. 4
    layerElfic Flesh (72.098)Vallejo
    Final bright highlights·Artis Opus Series S 3
RecipeBlood Bowl Bases
  1. 1
    basecoatBlackVallejo
    Primer over sand·Harder & Steenbeck Airbrush ULTRA 2024 Medium
  2. 2
    highlightGoblin Green (72.030)Vallejo
    Light touch·Artis Opus Series D Medium
  3. 3
    highlightMoon Yellow (72.005)Vallejo
    Even lighter touch·Artis Opus Series D Medium
  4. 4
    basecoatBold Titanium WhitePro Acryl
    White stripe
  5. 5
    layerSC00 (Matte Black)Scale75
    Rim the base
RecipeBrown Leather - Alternate Version
  1. 1
    basecoatBlack BrownPro Acryl
    Artis Opus Series S 3
  2. 2
    edgeDark Golden BrownPro Acryl
    Artis Opus Series S 1
  3. 3
    highlightLight UmberPro Acryl
    Artis Opus Series S 1
RecipeDark Skin
  1. 1
    basecoatDark Flesh Tone (72.044)Vallejo
    Base all felsh·Artis Opus Series S 3
  2. 2
    layerCharred Brown (72.045)Vallejo
    Deepen the shadows·Artis Opus Series S 1
  3. 3
    highlightTan (72.066)Vallejo
    Lighten the highlights·Artis Opus Series S 1
  4. 4
    highlightBugman’s GlowCitadel
    Brightest highlights into the pink tones·Artis Opus Series S 1
Other Paints
Coal BlackPro Acryl⇆Eshin GreyCitadel⇆Warm GreyPro Acryl⇆Dark Camo GreenPro Acryl⇆IvoryPro Acryl⇆Dark Yellow GreenPro AcrylDoombull BrownCitadel⇆Nuln OilCitadel⇆Agrax EarthshadeCitadel⇆Dark UmberPro Acryl⇆

Recipes

Methods I reuse across models - skin, metal, armour, cloth and the rest. Each step is one named paint, one technique and a note. Unless a step says otherwise, every recipe here starts on a primed model - the scheme that uses it usually says which colour.

Before you start, and what the technique words mean
Thin your paint
Almost everything here goes on thinner than it comes out of the pot. Neat paint dries thick and fills in the detail you paid for. Add water a drop at a time on a palette until it runs somewhere between milk and heavy cream, depending on the brand, then build the colour up in two or three coats rather than one.
Start on a primed model
Unless a step says otherwise, every recipe here begins on a model that has already been primed - paint will not sit properly on bare plastic. Black unless the scheme says otherwise, which is what most of these were painted over.
The same words mean two things
Wash, shade and layer are both things you do and names Citadel puts on pots. The badge on a step is the action. The Type column in the paint list is which range the pot came from. A step badged "layer" is often painted with a Base paint, and that is not a mistake.
basecoat
The first solid colour over primer. Two thin coats beat one thick one.
highlight
A lighter colour on the parts that would catch the light.
layer
A slightly lighter colour over part of the coat below, leaving its edges showing.
wash
Thin, watery paint that runs into the recesses and shades the whole area at once.
edge
A highlight along a sharp edge only, painted with the side of the brush.
shade
Darker paint placed deliberately in the shadows rather than left to flow.
glaze
Heavily thinned paint over dry paint, to tint it and soften the join between two colours.
stipple
Dabbed on with the tip of the brush for a broken, rough, mottled surface.
drybrush
Almost-dry paint dragged across raised texture so it catches only the high points.
blend
Two colours worked into each other while both are wet, so there is no visible line.
special
Anything that is not one of the above. The step note says what it is.

Paint Inventory

The paints I actually own - every pot on my shelf, not a catalogue of what exists. This is what the schemes and recipes are painted with.

PaintBrandTypeHueUsed in

Paint Conversion Chart

Citadel colours matched to their closest Vallejo, Pro Acryl and Two Thin Coats equivalents, by eye, over time. Nothing here is a measured colour match - the dots say how close each one really is.

Still filling this in: 8 of the 108 colours used in the recipes here have no row yet. Mostly Vallejo. A blank means not mapped, not that no equivalent exists.

How close the match is: near identical usable avoid

CitadelVallejoPro AcrylTwo Thin Coats