Skip to content
MINIATURES

RAY LAROSE|MINIATURES

⌕
Or browse: Schemes Recipes Gallery Paints Conversion Chart

New to this? Start here

Gold 4 steps The basecoat, wash, highlight sequence most metal is built on. Ultramarine Armour 4 steps The same idea with an edge highlight, which is what makes armour read as armour. Rust 3 steps Stippling and drybrushing, and hard to get wrong. Ork Flesh 9 steps The whole ladder: a basecoat, two layers, a highlight, then glazes to blend it together.

Every miniature I have painted, with the paints and the steps to paint it again.

Paint Schemes

How I painted each model: the exact paints, the order they went on, and the finish they gave.

Before you start, and what the technique words mean
Thin your paint
Almost everything here goes on thinner than it comes out of the pot. Neat paint dries thick and fills in the detail you paid for. Add water a drop at a time on a palette until it runs somewhere between milk and heavy cream, depending on the brand, then build the colour up in two or three coats rather than one.
Start on a primed model
Unless a step says otherwise, every recipe here begins on a model that has already been primed - paint will not sit properly on bare plastic. Black unless the scheme says otherwise, which is what most of these were painted over.
The same words mean two things
Wash, shade and layer are both things you do and names Citadel puts on pots. The badge on a step is the action. The Type column in the paint list is which range the pot came from. A step badged "layer" is often painted with a Base paint, and that is not a mistake.
basecoat
The first solid colour over primer. Two thin coats beat one thick one.
highlight
A lighter colour on the parts that would catch the light.
layer
A slightly lighter colour over part of the coat below, leaving its edges showing.
wash
Thin, watery paint that runs into the recesses and shades the whole area at once.
edge
A highlight along a sharp edge only, painted with the side of the brush.
shade
Darker paint placed deliberately in the shadows rather than left to flow.
glaze
Heavily thinned paint over dry paint, to tint it and soften the join between two colours.
stipple
Dabbed on with the tip of the brush for a broken, rough, mottled surface.
drybrush
Almost-dry paint dragged across raised texture so it catches only the high points.
blend
Two colours worked into each other while both are wet, so there is no visible line.
special
Anything that is not one of the above. The step note says what it is.

Ganger

🔗
GoliathNecromundaMarch 2026 · 5 models
FinishGritty, aggressive
PrimaryWarm reds and dirty flesh tones
ContrastBright greens, black elements
TechniqueLayered reds, simple blacks, splatter effects
BASE
PrimeRed
FLESH
BaseTuskgor Fur
LayerBugman’s Glow (ruddy)
ARMOUR (Red)
BaseMephiston Red
HighlightEvil Sunz Scarlet
SpotFire Bright
METALLICS
BaseVallejo Aged Metal
Wash(shared across model)
HighlightAged Metal
VariationLeadbelcher → Nuln Oil (select parts)
CLOTHING / WEAPONS
BaseBlack
HighlightMechanicus Standard Grey
HAIR (Mohawks)
BaseWolf Grey
LayerRandom Speedpaint (variation)
TUBES / VIALS
BaseMoot Green
ShadeWarpstone Green
HighlightSun Yellow dot
FINISHING (GORE)
RecipeBlood Splatter
RecipeAged Metal
  1. 1
    basecoatAged Metal Base (77.139)Vallejo
    Base metal·Vallejo Detail 2
  2. 2
    highlightAged Metal Shade (77.159)Vallejo
    Shade smoothly·Vallejo Detail 2
  3. 3
    highlightAged Metal Air Brush (77.179)Vallejo
    Bring up the centers·Vallejo Detail 2
  4. 4
    glazeAged Metal Light (77.119)Vallejo
    Brightest highlights·Vallejo Detail
RecipeBlood Splatter
  1. 1
    washBlood for the Blood GodCitadel + Lahmian MediumCitadel (2:1)
    Mix with medium·Artis Opus Series S 5
RecipeBrown Leather
  1. 1
    basecoatRhinox HideCitadel
    Base all leather·Artis Opus Series S 1
  2. 2
    basecoatAbaddon BlackCitadel + Lahmian MediumCitadel (1:2)
    Shade all leather recesses·Artis Opus Series S 1
  3. 3
    highlightDoombull BrownCitadel
    Chunky·Artis Opus Series S 1
  4. 4
    highlightSkrag BrownCitadel
    Scratchy damage highlight·Artis Opus Series S 1
  5. 5
    edgeXV-88 (Deep Ochre)Citadel
    Shakey - edge and scratch·Artis Opus Series S 00
  6. 6
    highlightUshabti BoneCitadel
    Dot highlight sparingly·Artis Opus Series S 00
RecipeLips
  1. 1
    basecoatBugman’s GlowCitadel
    Base with this colour·Artis Opus Series S 1
  2. 2
    highlightTuskgor FurCitadel
    20% of lips in this colour·Artis Opus Series S 1
  3. 3
    highlightIce Yellow (70.858)Vallejo + Tuskgor FurCitadel (1:2)
    Blend to lip cracks·Artis Opus Series S 00
Other Paints
Evil Sunz ScarletCitadel⇆Orange Fire (72.008)Vallejo⇆Coal BlackPro Acryl⇆Mechanicus Standard GreyCitadel⇆Wolf Grey (72.047)Vallejo⇆Moot GreenCitadel⇆Warpstone GlowCitadel⇆Sun Yellow (72.006)Vallejo⇆Aged Metal Base (77.139)Vallejo⇆Deep Orange IntenseAK InteractiveMephiston RedCitadel⇆Extra Matte VarnishTamiya

Recipes

Methods I reuse across models - skin, metal, armour, cloth and the rest. Each step is one named paint, one technique and a note. Unless a step says otherwise, every recipe here starts on a primed model - the scheme that uses it usually says which colour.

Before you start, and what the technique words mean
Thin your paint
Almost everything here goes on thinner than it comes out of the pot. Neat paint dries thick and fills in the detail you paid for. Add water a drop at a time on a palette until it runs somewhere between milk and heavy cream, depending on the brand, then build the colour up in two or three coats rather than one.
Start on a primed model
Unless a step says otherwise, every recipe here begins on a model that has already been primed - paint will not sit properly on bare plastic. Black unless the scheme says otherwise, which is what most of these were painted over.
The same words mean two things
Wash, shade and layer are both things you do and names Citadel puts on pots. The badge on a step is the action. The Type column in the paint list is which range the pot came from. A step badged "layer" is often painted with a Base paint, and that is not a mistake.
basecoat
The first solid colour over primer. Two thin coats beat one thick one.
highlight
A lighter colour on the parts that would catch the light.
layer
A slightly lighter colour over part of the coat below, leaving its edges showing.
wash
Thin, watery paint that runs into the recesses and shades the whole area at once.
edge
A highlight along a sharp edge only, painted with the side of the brush.
shade
Darker paint placed deliberately in the shadows rather than left to flow.
glaze
Heavily thinned paint over dry paint, to tint it and soften the join between two colours.
stipple
Dabbed on with the tip of the brush for a broken, rough, mottled surface.
drybrush
Almost-dry paint dragged across raised texture so it catches only the high points.
blend
Two colours worked into each other while both are wet, so there is no visible line.
special
Anything that is not one of the above. The step note says what it is.

Paint Inventory

The paints I actually own - every pot on my shelf, not a catalogue of what exists. This is what the schemes and recipes are painted with.

PaintBrandTypeHueUsed in

Paint Conversion Chart

Citadel colours matched to their closest Vallejo, Pro Acryl and Two Thin Coats equivalents, by eye, over time. Nothing here is a measured colour match - the dots say how close each one really is.

Still filling this in: 8 of the 108 colours used in the recipes here have no row yet. Mostly Vallejo. A blank means not mapped, not that no equivalent exists.

How close the match is: near identical usable avoid

CitadelVallejoPro AcrylTwo Thin Coats